I am in the process of trying to figure that out. I have done extensive programming in my car and this is one thing I have not gotten to work yet. I know the PSCM is different on active park vs. non active park vehicles, but only on FWD cars all AWD cars have the same PSCM despite there option configuration.
Any luck with that? It would be interesting to finalize this topic. If it's possible to enable active lines without Tech package or even with forscan it's impossible?
Nothing yet I waiting for Tennessee to approve my registration (due to salvage title, going on 10 weeks). I will drive it the required 12 miles and see if that fixes it but until then I am in a holding pattern.
Okay I "THINK" I figured out the problem. The SCCM is the problem, and is very option specific. They are 2015-2016 or 2017 plus. Then you have to match steering wheel heat, power tilt, and active park assist. I have a 2015 SCCM with heat, power tilt, and active park assist but it is causing problems because I put it in a 2017........maybe!!! At 488 dollars I believe I will let this sleeping dog lie, unless someone would like to fund it for me
I officially got it, took a year of on and off attention but what I finally did was replace the SCCM (don't think that was the problem in the end) Pulled as built for a similar vehicle and swap VIN in the programming (ABS, and BdyCntl) and then had to find the programming for removal of inverter coding. I finally got this car just like I wanted it!!!